Gotoh VS100N Wilkinson Tremolo Bridge for Stratocaster

The Gotoh VS100N is a modern two-point tremolo for Strat-style guitars, designed for players who want expressive vibrato without paying for it in tuning stability. Built in Japan by Gotoh, it combines a hardened steel base plate, solid steel saddles and a locking pivot, and it is widely regarded as one of the most refined upgrades available for a vintage-style tremolo.

Built for stability and sustain

Standard tremolos lose tuning when the bridge returns from a dive or pull. The VS100N addresses the usual causes. Its locking pivot studs hold the bridge firmly in place, so the unit returns to the same position every time instead of wandering. Solid steel saddles and a rigid base plate give the strings a stable, accurate contact point and transfer string energy cleanly into the body, which supports sustain and a clear, defined attack.

Key features

• Two-point pivot with locking studs: smooth, consistent movement and a bridge that settles back to pitch.
• Solid steel saddles: precise string guidance and long-term durability, even under hard playing.
• Hardened steel base plate: a rigid foundation that resists flexing and wear.
• Zinc block: adds mass for a full, resonant sound.
• 10.8 mm string spacing: 54 mm overall, the standard layout for Strat-style guitars.
• Gotoh arm holder system: the arm stays where you set it and swings freely when you need it, with no rattle.
• Individually adjustable saddles: set string height and intonation exactly the way you want.
• Tool-free string changes: faster restringing, which is a real convenience on stage and in the workshop.
• Made in Japan: precision machining and a clean, consistent finish.

Specifications

• Brand: Gotoh (Wilkinson/Gotoh VS100N)
• Type: Two-point tremolo, Strat-style, 6-string, right-handed
• String spacing: 10.8 mm (0.43"); total 54 mm (2.13")
• Maximum stud spacing: 56.8 mm (2.24")
• Block dimensions (H x W): 41 x 63 mm (1.61 x 2.48")
• Saddles: solid steel
• Block: zinc
• Origin: Japan

What's included

Tremolo arm, spring, spring claw with screws, hex wrench, locking stud and anchor, ready for installation.

Fitment and installation notes

The VS100N suits Strat-style guitars with a two-point tremolo layout. It is a drop-in match for many instruments, but dimensions differ slightly between models and between older and newer bridges. Before installing, compare the stud spacing, the block size and the route in your guitar. The block is large and has notches that differ from some vintage-style blocks, so the cavity or the arm hole may need a little fitting on some guitars. The anchor bushings can also differ in diameter from those on your current bridge, so check them against the holes in the body. A good setup will matter: fresh strings, a well-cut nut and properly set spring tension all help the tremolo return to pitch.

Who it's for

Players replacing a worn or low-quality tremolo, owners of Strat-style guitars who want more stability and precision, and builders looking for a dependable, well-made bridge for a custom project. Players who rely on subtle vibrato and dive bombs alike will appreciate how the VS100N tracks and comes back in tune.

Finishes

The VS100N is offered in honed chrome, honed gold, honed black and honed cosmo black, so you can match the hardware on your guitar.